Assembling your XAMAS Skate Bag
Congratulations! You're now the proud owner of XAMAS signature skate bag! Before you begin to enjoy carrying your items in your XAMAS skate bag for your daily practice and competition, be sure to read these simple instructions and assemble your skate bag.
Inside the bag, you'll find:
- 1 x removable base board
- 1 x mini screw driver
- 4 x screws
- 4 x bag feet (metal type in ACC009 or non-slip plastic in ACC155/ACC158/ACC159)
- 4 x bag feet padding
Step 1
Remove your skate bag from its packaging.
Step 2
Locate the removable base board inside the bag. Place it flat within the bag. There are holes punched on the board to match those on the bag.
Step 3
Locate the assembling parts inside the mesh pocket.
Step 4
Put a screw through the holes on the base board and the bag. With the mini screwdriver, hold the screw in-place.
Step 5
With the mini screwdriver holding the screw in place, put the padding on top of the screw, then the bag feet. Turn the bag feet in clockwise direction. Screw the bag feet tightly to secure it.
Step 6
Repeat Steps 4 and 5 to assemble the rest of the bag feet.